tie rod

Improvement of fixed tie rod structure of cyclone

旋风分离器固定拉杆结构的改进

Steering knuckle tie rod end pressure lubricator Grayioc tubing joint

转向节横拉杆接头油嘴

Drive shaft, Tie rod end assembly, Ball joint, Control arm assembly.

悬挂球头、拉杆球头、横拉杆、拉杆总成、控制臂总成等。

Tie Rod End Adjusting Sleeve Nut

转向拉杆端调整轴筒螺栓

Check the right tie rod joint.

检查右侧横拉杆接头。

Test and Research on the Retaining Structure-Anchor Pile with Tie Rod

拉杆锚固桩墙的试验研究

The application of steel tie rod can decrease usage amount of steel and make the structure lighter and graceful.

钢拉杆的应用可以降低工程用钢量，是建造大跨度结构及大吨位码头的重要构件。

This can be done through adjusting the length of the tie rod.

调节前束可以通过调节横拉杆的长度来进行。

The Automatic Testing Device of Hardness of Tie Rod Stud for Auto-Engine

汽车发动机连杆螺栓硬度自动检测装置

In recent years, it has been conducted an intensive study on high strength constructional steel tie rod.

近年来，我国对高强度建筑钢拉杆进行了大量的应用研究。

Analysis of random dynamic response to tie rod of the prestress rolling mill

预应力轧机拉杆的随机动力响应分析

Fracture analysis of intermediate tie rod of well drilling pump

钻井泵中间拉杆破断分析

Cut-off point of tie rod influences toe angle greatly impacted wheels toe angle.

转向拉杆断开点的位置对车轮前束角的影响很大；

Analysis of Large Tie Rod with Finite Element Method

大拉杆有限元分析

Steel tie rod has certain rigidity that makes the installation more easy and convenient.

同时钢拉杆本身具有一定的刚度，便于施工安装，其应用更加广泛。

Mount the tie rod end on the wheel carrier.

将横拉杆端安装到车轮托架上。

Construction technique of back pouring of tie rod arch bridge arch rib steel pipe concrete

钢管混凝土系杆拱桥拱肋混凝土倒注施工技术

Analysis of the Hot Die Forging Process for the Tie Rod by Finite Element Method and Prediction of the Forging Die Life

连杆热模锻过程有限元分析及锻模寿命预测

The manufacture and application of high strength steel tie rod for engineering

工程用高强度钢拉杆的研制与应用

Technical application and investigation of the high strength constructional steel tie rod

高强度建筑钢拉杆的应用与研究

The tie-rod ends have left-handed or right-handed thread and are locked with coupling bolts.

该拉杆两端有左手或右手线程,并锁定与耦合螺栓.

The tiny multi channel stress measuring system for piston and tie rod of vehicle engine

车辆发动机活塞连杆微型多通道应力测试仪

Press the tie rod end off with a press-out tool.

用压出工具压出横拉杆端。

The Analysis and Solution of Process Plan for the Batch Production of Tie Rod

拉杆批量生产工艺方案的分析与确定

Formation of Steering Tie Rod Ball Studs by single cold Extrusion

转向拉杆球头销一次冷挤成型

Fracture analysis of intermediate tie rod was carried out by metallography, scanning electron microscope and EDS.

采用金相显微镜 、 扫描电镜、电子能谱仪等方法对钻井泵中间拉杆破断失效进行了分析.

The results showed that the intermediate tie rod was fractured by corrosion fatigue.

结果表明,该中间拉杆的破断属腐蚀疲劳失效.

Taping the thread of tie rod after painting to avoid damage during transportation.

喷涂后对螺纹进行保护，防止运输过程中发生碰撞。

Adjustable screw type steering gear Tie Rod End Adjusting Sleeve Nut

可调整式螺旋型转向装置转向拉杆端调整轴筒螺栓

High-durable smart steel tie rod based on FBG absolute measuring technology

基于光纤光栅绝对测量技术的高耐久智能钢拉杆